TAG 1000 User Manual download pdf (Page 32)

MIL-BOOK™

OPERATORS MANUAL

- 2-2 -

Figure 2-1 Opening the Notebook

2.2.3 Opening the PCMCIA, FDD, CD ROM/DVD/COMBO, DVD

RW Door

Open doors only when it is required to access components behind them.

To open a door:

1. Insert a small flat edged object (a small sized screwdriver or the edge of a small

coin) into the slot of one of the captive screws securing the access door.

2. Turn the screw counter-clockwise until it comes loose from its socket.

3. Repeat steps 1 and 2 for each screw securing the access door.

4. Use the handle to open the access door. If the access door does not have a handle,

use one of the loosened screws to pull open the door.

Figure 2-2 Opening a Door

2.2.4 Closing the PCMCIA, FDD, CD ROM/DVD/COMBO, DVD

RW Door

Be sure to close and secure the access doors before transporting the MIL-BOOK

1000.

1. Shut the door or put the PCMCIA/FDD/CD-ROM/DVD/COMBO/DVD RW

back in place.

2. Align the door or cover securing screws with their sockets.

3. Use your finger to hold the screw in place. Insert a small flat-edged object ( a

small sized screwdriver or the edge of a small coin) into the slot of one of the

securing screws and turn clockwise until tight.

4. Repeat step 2 and 3 for each securing screw.

2.3 Connecting and Installing Devices

This section gives instructions for installing, removing, changing, or connecting devices

via the notebook external ports or sockets.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 63 64

No comments

TAG 1000 User Manual Page 32